Dell Precision 7920 Rack Workstation Price in chennai, tamilnadu

laptop stores in chennai, velachery, tamilnadu

Dell Precision 7920 Rack Workstation

Processor :One or two Intel Xeon Scalable Processor family
CPUs (1st and 2nd generation) with up to 28
cores per processor and Intel Advanced Vector
Extensions, Intel Trusted Execution Technology,
Intel AES New instructions, Optimized Intel Turbo
Boost and optional Intel vPro™ technology
Operating System :
Windows 10 Pro for Workstations (up to 4 Cores)
Windows 10 Pro for Workstations (4 Cores Plus)
Red Hat Enterprise Linux 7.5
Red Hat Enterprise Linux 8.0 (Sept. 2019)is required for 2nd Generation Xeon SP(Cascade Lake) CPUs
Ubuntu Linux 16.04, 18.04
Chipset : Intel C621 (Lewisburg)
Memory : Six channel memory up to 1.5TB 2666MHz DDR4
ECC memory with dual CPUs, up to 3TB with select
CPU SKUs Up to 768GB of 2933MHz DDR4 ECC memory
24 DIMM Slots (12 DIMMs per CPU). Note: memory
speed is dependent on specific Intel Xeon Scalable
Processor CPU installed
Graphics :Support for 3 PCI Express x16 Gen 3 graphics cards1 up to 900W with 3 x 300W double width
graphics cards (dual CPU configuration)
Dual non redundant 1600W PSUs 220V
required for select high wattage graphics card
configurations, and some restrictions apply
High end 3D cards:Radeon Pro WX 9100, Radeon Pro SSG, NVIDIA Quadro GV100
NVIDIA Quadro P6000
NVIDIA Quadro RTX 8000 (future)
NVIDIA Quadro RTX 6000
NVIDIA RTX 5000
NVIDIA Quadro P5000
Mid range 3D cards: Radeon Pro WX 7100, Radeon Pro WX 5100, Radeon Pro WX 4100
NVIDIA Quadro RTX 4000
NVIDIA Quadro P4000
NVIDIA Quadro P2000
Entry 3D cards: NVIDIA Quadro P620, NVIDIA Quadro P400 Integrated VGA graphics motherboard connector
(part of iDRAC9 Systems Management and requires iDRAC9 Enterprise license to enable)
Storage : Support for up to (8) 2.5” or 3.5” SATA/SAS drives
Up to 8 x M.2 NVMe PCIe SSDs via 2 x Dell UltraSpeed Drive Quad x16 cards
(maximum requires dual CPUs), NVMe RAID 0,1,10 option on 1st card (Intel RSTe vROC)
PERC PCIe controllers required for SAS drive
support M.2 NVMe PCIe SSDs
Up to 8* x 2TB drives on 2 Dell Precision
Ultra Speed Drive Quad x16 cards
Requires dual CPU config
Storage : 2.5 SATA SSD
Up to 8 x 1TB
2.5 SAS SSD
Up to 8 x 800GB
2.5 SATA 7200 RPM
Up to 8 x 2TB
3.5 SATA 7200 RPM
Up to 8 x 8TB
2.5 SAS 10K RPM 12Gb/s
Up to 8 x 1.8TB
2.5 SAS 15K RPM 12Gb/s
Up to 8 x 600GB
Storage Controller Integrated: 2 x Intel chipset AHCI 6Gb/s SATA
controllers with 4 ports (total 8) each for HDD/SSD
One port for optical drive
Intel RSTe software RAID 0, 1,5,10 supported across
4 SATA ports on 1st controller only. (Maximum 4 drives in RAIDset)
Intel RSTe (vROC) software RAID 0,1,10 option
(motherboard activation key) for M.2 NVMe PCIe
SSDs on 1st Dell Ultra-Speed Drive Quad x16
or Duo x8 card (0,1). Customer kit available for Intel
RSTe (vROC) motherboard activation key for NVMe
RAID support
Optional: PERC H330 12Gb/s SAS (6Gb/s SATA) 8
port PCIe controller supports JBOD and software
RAID 0,1,5,10
PERC H730P PCI-e SAS 12Gb/s (SATA 6Gb/s)
Hardware RAID PCIe controller with 1GB cache
(Super Cap backup, RAID 0/1/5/10 (no JBOD)
PERC H740P PCI-e SAS 12Gb/s (SATA 6Gb/s)
Hardware RAID PCIe controller with 4GB cache
Network Daughter Cards :
Base: Intel i350-Quad port 1Gb Ethernet Network
Daughter Card (4 x 1Gb ports)
Optional: Intel X550-Dual port 10Gb + Intel I350
Dual port 1Gb Ethernet Network Daughter card (2 x
10Gb + 2 x 1Gb ports )
Intel X710 Dual port 10Gb DA/SFP+, + I350 Dual
port 1Gb Ethernet Network Daughter card
Integrated: Integrated Broadcom® BCM54210
Ethernet LAN 10/100/1000 for iDRAC9 controller
use with System Management tool suite
(Super Cap backup), RAID 0/1/5/10 (no JBOD)
Note: Windows 7 is not supported on the PERC
H740P controller. PERC controllers are installed in Slot 3
Add-in cards : Optional: Dell Precision Ultra-Speed Drive Duo
(HH/ HL,x8 card) and Ultra-Speed Drive Quad
(FH/FL,x16 card) with active cooling. Support for up to 2
and 4 M.2 NVMe PCIe SSDs respectively
USB 3.1 (Gen 2) 10Gb/s Type C card (2 ports) 1 DP
pass through port Optional: Dual & quad (FH card)
display Teradici PCoIP PCIe remote workstation
access cards. Full height and low profile bracket
versions of dual display card available. Serial Port
PCIe Card (single port)
I/O Ports : Front :
2 USB 2.0
1 USB 2.0 Management port (IDRAC9)
1 VGA Port for iDRAC9
Internal : 1 USB 3.1 Type A – supports standard USB
storage key : SD Vflash media connector
Rear : 2 USB 3.1 Type A
4 RJ45 Network
1 Serial
1 RJ45 for iDRAC
1 A VGA Port for iDRAC
Chassis : HxWxD: 3.41 x 17.0 x 28.37 (29.78 with bezel)
86.8mm x 482mm x 715.5mm (751.3mm with bezel)
Bays: (1) external slimline optical bay; (8) front
accessible 3.5” bays (support total of (8) 3.5 or
2.5 HDD/SSD drives)
Slots: All slots PCIe Gen 3. (6) PCIe full height/full
length slots, (1) PCIe full height/half length slot, (1)
PCIe low profile/full length slot
Up to (3) double width x16 cards supported
All slots x16 mechanically
With single CPU – (1) x x16, (1) x x8, (1) x x8 half
length, (1) x x8 low profile PCIe slots
With dual CPUs (2) x x16, (2) x x8 PCIe slots
Power Supply: One or two redundant hot pluggable
1100W –90% efficient (80PLUS Gold Certified)
Available 1600W PSU in non-redundant mode
220V is required for certain configurations
Storage devices : Slimline options: DVD-ROM; DVD+/-RW
Security Options : Trusted Platform Module (TPM 1.2 or TPM 2.0)
chassis Intrusion switch; Setup/BIOS Password; I/O
Interface Security; lockable front bezel, Dell Data
Guardian, Dell Endpoint Security Suite Enterprise
Warranty & Support Services :
3 Year Limited Hardware Warranty and 3 year NBD
On Site Service after Remote Diagnosis
Optional: Dell ProSupport is designed to rapidly
respond to your business’s needs, help protect
your investment and sensitive data, and provide
enhanced proactive support services to help reduce
risk and complexity within your IT environment

Call for Best Price